TECHNICAL
SUPPORT
GUIDE
SUPPORT AND SERVICE
GUIDE TO INSTALL LOPOLIGHT PRODUCT
When you are installing a new Lopolight product to an existing installation which includes a NLC system or LMR card a “teach in” has to be completed so the system ands the light functions correctly.
Support
Check the connection
Turn on the light connected to POS1 either using the control panel or the manual/emergency button located on the LMR/Q, after lamp has been detected/start-up flash, the alarm will sound, and the LMR/Q turns red.
Replacement
Replace the LMR/Q
The LMR/Q is ready 35 sec after the LED turned red/alarm sounds, activate the teach-in switch for POS1. (Insert a 2mm plastic pin or another non-conductive item and pry carefully to activate the switch. During teach-in, the LED on the front of the LMR/Q will flash yellow. (When teach-in is complete, the alarm will turn off and the OK LED appear)
WARRANTY
STEP 4.
Please let the process end before moving to the next LMR/Q. If activating the teach-in button proves troublesome, it may help if the LMR/Q cover is removed to ease the access to the teach-in buttons. During the teach in, a yellow light will flash on the LMR/Q, it turns green when teach in is complete
SUPPORT AND SERVICE
Teach in proces
When you are installing a new Lopolight product to an existing installation which includes a NLC system or LMR card a “teach in” has to be completed so the system ands the light functions correctly.
OVERSKRIFT
POWER SUPPLY
A no-nonsense support program to maximize operational readiness of your navigation light system Lopolight will ensure that all relevant spare parts including instructions for service is on board your vessel and a direct hotline access is available 24/7.
OVERSKRIFT
RETROFIT
Reliable and precise monitoring of your navigation lights is needed both for safety - and it is required by the authorities, such as Class, Flag, Maritime authorities and IMO.
OVERSKRIFT
TOOLS TO USE
We get demands for situations and challenges that can and will..... One of the new things we are working on, a battery lighting power unit, which is a mobile battery supply case for barges. We will present and tell more about it at the stand.
We are looking forward to introduce a final product version shortly.
OVERSKRIFT
DE-ICING AND
PRE-HEATING
When working in sub-zero temperature it is essential to have equipment that you can trust and rely on. The Lopolight ice-class lights are fully automatic, and monitored all the way. The de-icing functions are integrated in the design giving a number of be