Replace a Lopolight light in system with Lopolight NLC:

This is the basic steps for install/replace lopolight navigation lights. 

1. WITH NLC
Turn OFF the NLC power, both Primary and Secondary

2. REMOVAL OF LIGHT
Take your Nav. light and remove the screw (use a HEX 3 mm key or TORX 15’). Download and follow the Installation guide manual. www.lopolight.com/support/down-load-area

3. REPLACE NAV. LIGHT
Twist the top (light) from the base. Replace and connect the new light.

4. POINTING DIRECTION
Make sure that you set the light pointing in the right direction - arrow pointing toward the bow along the centerline

5. TURN ON POWER
Turn ON NLC power, both Primary and SecondaryThe Nav. light is now been detected, the alarm will sound, and the LMR/Q LED turns red. Push the Manual ON/OFF button. Wait 35 seconds - the LMR/Q is now ready to teach-in.

6. MAKE THE TEACH-IN
Activate the teach-in switch (Insert a 2mm plastic pin or another non-conductive item and pry carefully to activate the switch. During teach-in, the LED on the front of the LMR/Q will flash orange. (When teach-in is complete, the alarm will turn off and the OK LED(Green) indicators appear)

7. LMR/Q CART
LMR/Q short description

8. READY TO GO
The navigation light is now active and ready to go. The control panels still have the same setup as before.

9. MOVE ON TO NEXT LMR/Q
Please let the process end before moving to the next LMR/Q. If activating the teach-in button proves troublesome, it may help if the LMR/Q cover is removed to ease the access to the teach-in button.

Support
videos:

WHAT KIND OF VESSEL POWER

A no-nonsense support program to maximize operational readiness of your navigation light system  Lopolight will ensure that all relevant spare parts including instructions for service is on board your vessel and a direct hotline access is available 24/7.

CLASS APPROVED POWER SUPPLY

For classed vessels we offer class approved power supplies from Phoenix®, with options of AC or DC. Extra large power supplies available for Ice Class installations..

Part numbers:
500-200-1AC
500-202-2AC
500-203-1AC/1DC
500-204-2DC
500-205-2AC Ice class

Alternatively we have a more compact option of high quality DC/DC power supply from Victron®

Part numbers:
500-210-1DC
500-211-2DC
500-212-2DC Ice class
500-213-No power supply

INSTALATION CABLE GUIDE
CABLE INFORMATION

We get demands for situations and challenges that can and will..... One of the new things we are working on, a battery lighting power unit, which is a mobile battery supply case for barges. We will present and tell more about it at the stand.

We are looking forward to introduce a final product version shortly.

INTERFACE

When working in sub-zero temperature it is essential to have equipment that you can trust and rely on. The Lopolight ice-class lights are fully automatic, and monitored all the way. The de-icing functions are integrated in the design giving a number of be

NLC OPTIONS OF
SOLUTIONS

FULL SIZE NLC

Required for the Phoenix® power supplies. Each full size system holds up to 28 relays, several systems can be combined up to 60 outputs

COMPACT NLC

Ideal for installations where space is at a premium and power supply is DC. Each compact system holds up to 14 relays, several systems can be combined up to 60 outputs